Dear Glenn,
On Wed, 21 Jun 2000 20:21:04 -0500, Glenn McCorkle wrote:
> Check the box that says "Special base address" and then type in the
> adrress for the Comport you are using.
> 1..0x2f8, 2..0x2f8, 3..0x3e8, 4..0x2e8
I've tried it. Unfortunately the result is the same.
> Another problem we've found with epppd is that it can't handle a "hole"
> in the com ports.
My mouse is on the com1 and my modem is on the com2 (external modem).
> One more posibility is that you might have the same problem as myself
> and several others...... Your BIOS might be misreporting the base port
> address of your modem.
Yes, it's possible.
> Here's the "fix" for this problem.
> Go here, http://www.angelfire.com/id/glenndoom/index.html
> Get comports.zip (unzip it)<g>, and place this line in your autoexec.bat
> (or run it from the command line if you prefer)
Thx, Glenn, I'll try it.
BTW, my general (and theoretical) problem:
1. epppd doesn't work
2. ODI+pkt2odi works
What is the difference?
> If you have tried all of the above and you still can't get epppd to
> work.... I'm stumped. :-)
:-) I shall inform you about result.
regards,
Csaba
-- Arachne V1.62, NON-COMMERCIAL copy, http://arachne.cz/
