On Tue, 03 Apr 2001 15:12:48 -0700, L.D. Best wrote:
> In order to run ns I have to load winsock ... After I exit, Arachne
> then refuses to recognize TCP/IP connection exists.
> Short of reloading the driver [which ends up loading low], is there a
> way to make Arachne see that it's still in place?
See that big red button on the CPU ?
Press it.
Sorry, couldn't resist that one.<VBG>
Seriously,
This is a well known problem with Winsock.
It "locks-up" the modem until the machine has been rebooted.
In your case that would be...... cable-modem.
On a similar note,
This P150 must be "powered-down/powered-up" after running W95.
If all I do is reconfigure and Cntrl+Alt+Del to reboot into OpenDos....
the result is a complete lock-up as the BIOS attempts to detect the CDRW
(Blaster CDRW-4224)
--
Glenn
http://arachne.cz/
http://freedos-32.sourceforge.net/
http://www.delorie.com/listserv/mime/
http://www.angelfire.com/id/glenndoom/download.htm
