It works, but it doesn't ...
On Wed, 4 Apr 2001 21:33:07 +0200, Bernie <[EMAIL PROTECTED]> wrote:
> @echo off
> c:\dos\mem/c|c:\dos\find "WINPKT">nul
> if not errorlevel 1 goto end
> lh c:\dos\pcipkt.com 0x60
> lh c:\dos\winpkt.com 0x60
> :end
> c:\dos\win.bat
That was pretty much what I was doing [except for checking to see if
winpkt already loaded\] ...
> I can use all DOS WatTCP programs after running Windows without any
> problem. The only problem I've encountered is that I can't remove
> winpkt.com from memory (although mark and release probably would work) but
> since it's fairly small (2560 bytes) it doesn't matter much.
My problem is that windoze won't let me quit if I don't "close" Trumpet.
If I "close" it, then Arachne can't find the driver for the NIC,
although it's still nicely loaded. :( I use dozerware so seldom; is
there a way to quit windows and *not* close trumpet???
> What version of Trumpet are you using? I'm using 2.1f which has worked good
> for me. Many others have complained that they needed to write complicated
> scripts to it when they switched ISPs. I've never needed to do that so I
> really don't know much of the program. All I know is that it works 100%
> reliable, so I can't help with anything more specific about it.
> Are you using fixed IP or (real) BOOTP/DHCP?
I'm using version 3.0 of Trumpet, complete with timeworm.
When running Arachne [and NS] I'm using fixed IP; when I run Telnet or
FTP programs, that's (real) BOOTP/DHCP.
For those whose sensitivies I have impinged upon by "buckling under &
using dozerware" I offer the following palmative: On NS my Home Page is
arachne.cz
l.d.
-- Arachne V1.70;rev.3, NON-COMMERCIAL copy, http://arachne.cz/
