Stephane, Time is short here also which is why I haven't responded to your earlier post.
IIRC, in your ARACHNE.CFG, you have AutoLogIn set to "No", yet you give a script. I would suggest that you change that to "Yes" and see if that will help. If you don't get online, check the box on the dialer page to show terminal. This will let you see what is happening as your computer and ISP exchange dialogs. Also, make sure that the last "WaitFor" in the login script, ">", is actually what your ISP sends. Case (upper and lower) is critical in the "WaitFor's". In replying to a message from the list, using your reply button will send your reply to the list, but, remember that you must have the message that you are replying to on the screen. If you receive a private message from a list member, the reply will go to the person that sent you the message. HTH Roger Turk Tucson, Arizona USA Stephane Roth wrote: . > This is just an interim msg to let you all now I received your advice and . > I appreciate it too ; I have had no time however to try the suggested . > manoeuvers , will report back when its done , hopefully it'll be a full . > success report then ! . > Unfortunately again , I have little spare time and fixing my Arachne is . > not an absolute priority , with all due respect ... . > Thomas Mueller : my tries were under DOS only , using a 'real' HW modem. . > AFA I remember , I did with the dialer included in the std Arachne . > installation. . > But again , your time is appreciated so please don't loose it trying to . > help before I make some new experiments ... . > All : Am I right in sending to the list as [EMAIL PROTECTED] , or could I . > use the "reply" button of my browser and still be sending to the list ? . > -- . > S.Roth
