The system has a number of drivers loaded as placed by QEMM, as many as will fit are loaded high but a few are loaded low. Until QEMM was installed, all the drivers could not be loaded at the same time.
There is plenty of expanded memory available (63M). Most DOS programs do seem to work in this environment. Does Arachne have compatibility problems with QEMM or any other memory manager? > From: "Clarence Verge" <[EMAIL PROTECTED]> > Date: Sun, 12 May 2002 00:32:03 -0400 > Subject: Re: Insufficient low memory problem > On Sat, 11 May 2002 21:46:14 -0400 (EDT), Vikram Sethi wrote: >> We are trying to get Arachne 1.70 to work with our MS-DOS 6.22 machine >> using memory manager QEMM 8. We have already been able to get DOS ppp to >> connect and have successfully run MS-Kermit 3.14 on top of it. However, if >> we try the same procedure with Arachne (ie, connect with DOS ppp and then >> try to run Arachne), we get an "insufficient low memory" message and Arachne >> does not start. > Vikram, you must have too many programs loaded low - or conversely > not enough loaded high. Please post the output of MEM /c and your > config.sys and autoexec.bat. > - Clarence Verge > - Back to using Arachne V1.62 ....
