Hi folks, I'm running Arachne together with QEMM 8 at OpenDOS 7.1 without any problems.
Regards Joerg On Wed, 15 May 2002 21:43:09 -0400 (EDT), Vikram Sethi wrote: > The system has a number of drivers loaded as placed by QEMM, as many as will > fit are loaded high but a few are loaded low. Until QEMM was installed, > all the drivers could not be loaded at the same time. > There is plenty of expanded memory available (63M). > Most DOS programs do seem to work in this environment. Does Arachne have > compatibility problems with QEMM or any other memory manager? >> From: "Clarence Verge" <[EMAIL PROTECTED]> >> Date: Sun, 12 May 2002 00:32:03 -0400 >> Subject: Re: Insufficient low memory problem >> On Sat, 11 May 2002 21:46:14 -0400 (EDT), Vikram Sethi wrote: >>> We are trying to get Arachne 1.70 to work with our MS-DOS 6.22 machine >>> using memory manager QEMM 8. We have already been able to get DOS ppp to >>> connect and have successfully run MS-Kermit 3.14 on top of it. However, if >>> we try the same procedure with Arachne (ie, connect with DOS ppp and then >>> try to run Arachne), we get an "insufficient low memory" message and Arachne >>> does not start. >> Vikram, you must have too many programs loaded low - or conversely >> not enough loaded high. Please post the output of MEM /c and your >> config.sys and autoexec.bat. >> - Clarence Verge >> - Back to using Arachne V1.62 .... -- Arachne V1.70, NON-COMMERCIAL copy, http://arachne.cz/
