Hi Stewart, ----- Original Message ----- > Hello Andreas, > > I have been away for awhile as my wife and I relocated from the East > Coast of the U.S. to Oregon. Now that we are settling in a bit, I am > once again finding some time to work on my Odroid XU4. > > I hope all is well with you. I see you have been working hard on trying > to get the Odroid working with Fedora 26.
I tested the Arndale (Exynos 5250) with F26 GA, there was an issue with initial-setup (missing serial console ttySAC2), but otherwise it worked quite well. Its not the same board, but the kernel *should* work. > > I have been periodically trying new versions of Fedora since Fedora 24 > kernel 4.6.5-300.fc24, including Fedora 26. Something broke after the > 4.6.5-300.fc24 release. I cannot tell if the problem lies in the newer > u-boot.bin or elsewhere. After the system got broken, I no longer get > any output though the serial cable to determine where such problems > lie. However, if I install the Hardkernel Ubuntu Mate with 4.9 kernel, > everything works fine. I get output through the serial cable and the > system boots up beautifully. > > is it possible for you to email me a zipped copy of the u-boot.bin file > you are using to boot? Is it the 4.6.5-300.fc24 version? > > Thanks. > > Kind regards, > Stewart > > > On 07/25/2017 12:17 AM, arm...@rirasoft.de wrote: > > Hi there, > > > > I've managed to get Fedora 26 run with kernel 4.6.5-300.fc24.armv7hl > > on Odroid-XU4 with Cloudshell 2. The onbord RAID 1 (USB-Attached SCSI > > (UAS)) is working with kernel 4.6.5-300.fc24. > > > > > > [root@myodroid ~]# lsusb -d 152d:0561 > > Bus 004 Device 003: ID 152d:0561 JMicron Technology Corp. / JMicron > > USA Technology Corp. > > [root@myodroid ~]# > > > > Next steps to do: > > > > - move OS from SD-Card to more faster eMMC-Card. How to do it? > > - Kernel update to actual version. I've update Kernel to > > 4.11.11-300.fc26 and system boots with 8 CPU (FC24 = 5 CPU), but only > > the first part of kernel is booting; then it stops. > > - compiling modules to activate the color LCD > > > > Is there anybody who can help me with the first 2 steps ? > > > > > > Thanks > > Andreas > > _______________________________________________ > > arm mailing list -- arm@lists.fedoraproject.org > > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > _______________________________________________ > arm mailing list -- arm@lists.fedoraproject.org > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org
