Hi All I have two mid-tiers and two AR Servers in a server group with netscaler load balancing in-between. Had a situation where the second AR Server in the group stopped responding but the load balancing did not detect this and whole server group became inaccessible. Digging a little deeper into the load balancing determined the netscaler pings the per port but doesn't go any deeper. So in this situation, the port was up and netscaler continued to push traffic to the hung server.
Is there something better that netscaler can monitor that would detect when the AR Server stops? If not, is there any way to ensure that if one server quits, everything goes to the other server and users are not interrupted? ARS 7.6.04 SP5 ITSM 7.6.04 SP2 Mid-Tier 7.6.04 SP5 Thanks Mark Mark Brittain | Sr. Systems Engineer | 315.637.9337 O 315.882.5360 M 125 Elwood Davis Road | Syracuse NY 13212 [Navisite] ________________________________ This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout. _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"
