Binyamin: We look like we had overflow from SP229 to SP230, I have never seen this before on z/OS. The PSW appearly according to IBM pointed to our IRREVX01 exit, ok i understand that and it was the GETMAIN that got a non-zero return code. So we know what happened , not the why . But thanks for the offer, much appreciated
Scott J Ford Software Engineer http://www.identityforge.com ________________________________ From: Binyamin Dissen <[email protected]> To: [email protected] Sent: Wednesday, June 6, 2012 3:05 PM Subject: Re: Getmain question Which instruction got the pic-11? Can you post the mini-dump including PSW and registers? On Wed, 6 Jun 2012 09:41:13 -0700 Scott Ford <[email protected]> wrote: :>Guys: :> :>I am issuing a : :> :> LA R0,DYNSIZE dynamic area size to R0 :> GETMAIN RU,LV=(0),SP=229 getmain dynamic area :> LTR R15,R15 Do we have a zero return code ? :> BNZ GETVERR No bailout with a msg :> USING DYNAMIC,R1 Getmain - good :> ST R13,SAVEAREA+4 save caller's savearea address :> ST R1,8(R13) save our savearea address :> LR R13,R1 our savearea address to R13 :> DROP R1 :> USING DYNAMIC,R13 :> LA R1,IDFWORK :> ST R1,PARMLIST :> OI PARMLIST,X'80' :> :>This is being issued in IRREVX01, DYNSIZE is about 1000 bytes. A customer reported a S0C4-11 but they had :> :>DIAG00 in SYS1.PARMLIB as :> DIAG :>VSM TRACK CSA(ON) SQA(ON) :>VSM TRACE :>GETFREE(OFF) :>VSM ALLOWUSERKEYCSA(YES) :> :>What we saw in a trace is getmains for subpool 230...we arent using 230, if sp229 didnt have enough storage i know this is :>Private High, would i see a S0C4-11...? :> :>Whats even more interesting, onely one customer out of about 300+ are seeing this on z/OS 1.11 :>One of the reasons I am asking, there seems to be a lot of issues with the DIAG parameter: :> :> :>VSM ALLOWUSERKEYCSA(YES) :> :> :> :>Am i all wet or am i thinking right .... :> :>Regards, :> :>Scott J Ford :>Software Engineer :>http://www.identityforge.com -- Binyamin Dissen <[email protected]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies.
