Paul,
Please verify that Static Eye is actually correctly populated in the
dump. Although it is a DC, it may be in a DSECT so not populated.
Tony Thigpen
-----Original Message -----
From: [email protected]
Sent: 08/17/2014 05:32 PM
Static Eye is a Constant in memory, I dont write anything that difficult.
*---------------------------------------------------------------------*
* Anchor Block
*---------------------------------------------------------------------*
STATIC_DATA DS 0D .
STATIC_EYE DC CL12'NINEXXXXV002' .Eye Catcher
STATIC_NAME DC CL4'XXXX' .SubSystem Identifier
STATIC_STAMP DC 4XL4'00000000' .SubSystem Time Stamp
STATIC_STATE DC XL4'00000000' .SubSystem State
---------- Original Message ----------
From: Sam Siegel <[email protected]>
To: [email protected]
Subject: Re: Can Someone Point Out My error Here
Date: Sun, 17 Aug 2014 14:25:24 -0700
I did see what you mention and i was confused also. That is why I wanted
to see all the code.
On Aug 17, 2014 2:22 PM, "[email protected]" <[email protected]> wrote:
STATIC EYE is a Constant in memory ANd If You look at the COde
It is compared to 00(R1) the JNE was not taken.
That why im confused
---------- Original Message ----------
From: Sam Siegel <[email protected]>
To: [email protected]
Subject: Re: Can Someone Point Out My error Here
Date: Sun, 17 Aug 2014 14:12:22 -0700
Provided code does not show how anchor1 is populated.
Sample code does not show what static_eye points to.
Please provide all code.
On Aug 17, 2014 1:28 PM, "[email protected]" <[email protected]> wrote:
Im executing 5 Instructions and then I force an Abend.
I load the address of a storage area into Register 1 nd verify it by the
presence of an eye-catcher.
After executing the 5 instructions below; I expect the area Labeled
"LOCLCOMM" to contain a copy of the eye-catcher that Register 1 is
pointing
to. However after execiting the 5 instructions the area LOCLCOMM contains
256 Binary zeroes ???
.
.
There is No Multi Tasking as this is a single TCB program.
.
.
L R1,ANCHOR1@ Storage Anchor Address
CLC STATIC_EYE,00(R1) Valid Eye Catcher
JNE NO_STATIC_EYE NO Eye-Catcher
*
LARL R14,LOCLCOMM DEBUG
MVC 00(16,R14),00(R1) DEBUG
ABEND 444,DUMP,STEP DEBUG
*
*
*
DS 0D Alignment
DC CL8'LOCLCOMM' Eye Catcher
LOCLCOMM DS CL256
DC CL12'LOCLCOMMEND ' Eye Catcher
ORG ,
.
.
So what Am I missing here ?
Can someone point out my mistake ?
.
.
Paul
