Ok, no prob. Thanks anyways.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dinesh Nair
Sent: quinta-feira, 14 de Setembro de 2006 10:30
To: Asterisk on BSD discussion
Subject: Re: [Asterisk-bsd] libpri for FBSD 6.1 and 1.2.11
On 09/14/06 11:54 Bill Harris said the following:
>
>
>
> PRI is up, and has been working well since last Friday. Amazing
> how little CPU this board is using compared to the 4 port card.
well done, bill.
> CallerID[number]. The * box that the phones are registered to is
> getting caller/number from the PRI box over IAX, because I see
> the numbers in the CDR records of the destination * server.
on the box which is driving the cisco phones, what does
Noop(${CALLERID(name)}) and Noop(${CALLERID(num)}) show ? add these in
before the Dial() is made to the cisco phones and look for the output on
the console.
--
Regards, /\_/\ "All dogs go to heaven."
[EMAIL PROTECTED] (0 0) http://www.openmalaysiablog.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do |
| for b in clients employers associates relatives neighbours pets; do |
| echo "The opinions here in no way reflect the opinions of my $a $b." |
| done; done |
+=========================================================================+
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
