Name only. Did the same on the PRI box, and incoming calls
off the PRI show the same, name only. The number field is empty.
Am I missing a vital option in my zapata.conf? Here's all that I have
in it.
[channels]
switchtype=national
context=pri_att
signalling=pri_cpe
echocancel=64
rxgain=-4.0
txgain=-5.5
group=1
channel => 1-23
usecallerid=yes
hidecallerid=no
Bill
On Sep 14, 2006, at 4:30 AM, Dinesh Nair wrote:
On 09/14/06 11:54 Bill Harris said the following:
PRI is up, and has been working well since last Friday. Amazing
how little CPU this board is using compared to the 4 port card.
well done, bill.
CallerID[number]. The * box that the phones are registered to is
getting caller/number from the PRI box over IAX, because I see
the numbers in the CDR records of the destination * server.
on the box which is driving the cisco phones, what does Noop($
{CALLERID(name)}) and Noop(${CALLERID(num)}) show ? add these in
before the Dial() is made to the cisco phones and look for the
output on the console.
--
Regards, /\_/\ "All dogs go to heaven."
[EMAIL PROTECTED] (0 0) http://
www.openmalaysiablog.com/
+==========================----oOO--(_)--OOo----
==========================+
| for a in past present future;
do |
| for b in clients employers associates relatives neighbours
pets; do |
| echo "The opinions here in no way reflect the opinions of my $a
$b." |
| done;
done |
+=====================================================================
====+
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
