Yes, I have zaptel_enable="YES" in rc.conf, and I get the following error when I issue /usr/local/etc/rc.d/zaptel.sh start
zaptelkldload: can't load /usr/local/lib/zaptel/zaptel.ko: Operation not permitted I'm assuming it has to do with the zaptel device that's not loaded yet. Any other ideas? Thanks, John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mimura,Shigeki Sent: Tuesday, May 29, 2007 6:49 pm To: Asterisk on BSD discussion Subject: RE: [Asterisk-bsd] Zaptel Drivers John Strock wrote: > I'm running FreeBSD v6.2 and Asterisk v1.4.3. I've installed Asterisk via the Ports and everything has been working great. I just ordered and received a TDM01B card from Digium and am not sure how to install and configure anything for it. Ztcfg -vv give me the following: > > ztcfg -vv > > Notice: Configuration file is /usr/local/etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl' > Keyword: [fxsks], Value: [1,2,3,4] > Keyword: [loadzone], Value: [us] > Keyword: [defaultzone], Value: [us] > > 1 error(s) detected > > I've been using FreeBSD for several years, but am not familiar with loading drivers or devices (I knew how to load devices in v4.11, but not this version). > > Can you direct me to any articles on configuring my card for FreeBSD? Or offer any help? Did you load zaptel drivers? You should add zaptel_enable="YES" to /etc/rc.conf, and then restart or execute '/usr/local/etc/rc.d/zaptel start'. _______________________________________________ Asterisk-BSD mailing list Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd _______________________________________________ Asterisk-BSD mailing list Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd
