# kldstat Id Refs Address Size Name 1 17 0xc0400000 6f55f8 kernel 2 1 0xc0af6000 3478 snp.ko 3 1 0xc0afa000 59f20 acpi.ko 4 8 0xc4f23000 32000 zaptel.ko 5 1 0xc4f59000 7000 qozap.ko 6 1 0xc4f61000 20000 tau32pci.ko 7 1 0xc4f83000 5000 wcfxo.ko 8 1 0xc4f88000 a000 wcfxs.ko 9 1 0xc4f98000 6000 wct1xxp.ko 10 1 0xc4fa6000 c000 wct4xxp.ko 11 1 0xc4fb2000 a000 wcte11xp.ko 12 1 0xc4fc4000 16000 linux.ko
So does that mean the driver and device is loaded...now I just need to configure Asterisk to use it? Thanks again, John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chad Leigh -- Pengar Enterprises Inc Sent: Tuesday, May 29, 2007 8:34 pm To: Asterisk on BSD discussion Subject: Re: [Asterisk-bsd] Zaptel Drivers On May 29, 2007, at 8:28 PM, John S. Strock wrote: > After receiving your last response, one thing hit me, I have my server > locked down and have the following in my /etc/rc.conf file: > > kern_securelevel_enable="YES" > kern_securelevel="1" I thought that might be a problem but was checking some things before I replied as I was not sure how that affected kernel modules > > So I've now disabled these lines, and I get the following errors, now > instead of "Operation not permitted", I received "File Exists": > > > # /usr/local/etc/rc.d/zaptel.sh start > zaptelkldload: can't load /usr/local/lib/zaptel/zaptel.ko: File exists > > # kldload /usr/local/lib/zaptel/zaptel.ko > kldload: can't load /usr/local/lib/zaptel/zaptel.ko: File exists maybe it is already loaded from your startup? try # kldstat is it listed? Chad > > Again, I'm not familiar with loading modules and devices so I'm not > sure > what this means. > > To answer your install question... > > Installing Asterisk from ports appeared to have installed zaptel as > well, > because when I tried to install zaptel from ports, I received an error > stating it was already installed. Also, the zaptel.ko file exists in > /usr/local/lib/zaptel, so again, I assume it was created for me. > > Any more ideas? > > Thanks again, > > John > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Mimura,Shigeki > Sent: Tuesday, May 29, 2007 8:11 pm > To: Asterisk on BSD discussion > Subject: RE: [Asterisk-bsd] Zaptel Drivers > > John Strock wrote: >> As a side note, how do I get zaptel.ko, I assume when I installed > Asterisk >> via the ports, it would've installed the *.ko file, but apparently > not. > > When you installed asterisk from ports, also zaptel was installed > under > '/usr/local/lib/zaptel'. > How about to execute 'kldload /usr/local/lib/zaptel/zaptel.ko'? > _______________________________________________ > Asterisk-BSD mailing list > Asterisk-BSD@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > _______________________________________________ > Asterisk-BSD mailing list > Asterisk-BSD@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-bsd _______________________________________________ Asterisk-BSD mailing list Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd _______________________________________________ Asterisk-BSD mailing list Asterisk-BSD@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-bsd
