Does asterisk work now with the linejack in terms of both incoming and outgoing calls?
That would be sweet, but I thought it was only one direction or the other, and so I gave up on the idea of using mine.
AFAIK, it has always worked for both incoming and outgoing calls. What it canNOT do is to provide both an FXO (line) as well as an FXS (station) interface at the same time. In other words, it provides a single channel which can be provisioned as an FXO or an FXS at any single time, reprovisioning the interface would require a configuration file change and a restart of asterisk, and reprovisioning cannot happen dynamically within the call plan.
I wonder if that's the case. . .
I am working with a known-good (i.e. works with H.323 ohphone) Linejack.
I have it conf'ed, basically, like this:
mode=fxo device => /dev/phone0
But "show channels" doesn't show anything, and when I try to dial I get these errors:
-- Executing Dial("[EMAIL PROTECTED]:5036]/6","Phone/phone0/5551212") in new stack
NOTICE[24591]: File app_dial.c, Line 443 (dial_exec): Unable to create channel of type 'Phone'
== Everyone is busy at this time
I thought I had read a couple of threads on this list that the Linejack only does inbound calling. . . . It does seem to work OK when I configure it that way.
??
B.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
