ok I changed that but I still get a busy after the 6 digit. if dialing
"95551212" I get a busy on the last "1" and not after the last "2"
Thanks again :)
Dave
>>> [EMAIL PROTECTED] 3/24/2003 12:45:35 PM >>>
...
> I still get a busy when I hit the 6th number of
> a
> 7 digit dial +9 for the outside line? any thoughts? I do have the
> phone0 defined as inbound too? even if I undefine that i still have
> problems.
....
There was a mistake in the following. The second 'N' should have been
an 'x' since N is a number from 2 to 9 and X is a number from 0 to 9.
exten => _9NXXNXXX,1,StripMSD,1
exten => _NXXNXXX,2,Dial,Phone/p
should be
exten => _9NXXXXXX,1,StripMSD,1
exten => _NXXXXXX,2,Dial,Phone/p
Or another possibility, is that there needs to be some waits while
dialing.
For dialing through our existing PBX we needed to add waits after
dialing the 9. Depending on your PBX, you may also need waits ('w').
If so in your extensions.conf you need something like:
[outgoingOldPBX]
exten => _9Nxxxxxx,1,StripMSB,1
exten => _Nxxxxxx,2,Prefix,9ww
exten => _9wwNxxxxxx,3,Dial,ZAP/g2/${EXTEN}
exten => _91NxxNxxxxxx,1,StripMSB,1
exten => _1NxxNxxxxxx,2,Prefix,9ww
exten => _9ww1NxxNxxxxxx,3,Dial,Zap/g2/${EXTEN}
Don Pobanz
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
