Try to add this line to zapata.conf relaxdtmf=yes
before the "channel => " definition Martin On Wed, 28 May 2003, Nick Eggleston wrote: > We've got an asterisk system hooked up to a number of telephones via a channel > bank. > > [*]T100P---CAC(access bank)---Phones... > > What we are seeing is problems with DTMF tone detection on some (but not all) of > the FXS ports. In our testing, we plugged a simple analog phone into each of > the first 10 ports, called outside the syatem, and listed while the user > depressed the "5" key for four seconds. > > What we expect to hear on the remote-end is four seconds of DTMF tone. That is > what the local user hears. > > On some of the ports we do indeed hear four seconds of continuous DTMF. > On one port, we only hear about 1/2 second of DTMF followed by 3.5 seconds of > silence. > On anohter port, we hear about 3.5 seconds of silence, followed by 0.5 seconds > of DTMF. > On another port, we hear 4 seconds of DTMF interrupted by blips of silence. > > When not playing DTMF tones, we can hear just fine. > > Has anyone else had these symptoms? > > Can anyone suggest a way to debug this? > > Thanks! > -- > Nick Eggleston > Consultant > Data Communications Consulting, Inc. > 6320 Rucker Road, Suite E > Indianapolis, IN 46220 > 317/726-0295 x18 > 317/202-2445 (fax) > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
