On Sat, 2003-05-31 at 20:34, TC wrote: > Yea looks like i have a issue with t400 spans 2 & 4 :( > I now can get 2 pretty green lights on span 1 and span 3 & > on the adit 600 on T1-1 and T1-2 ..and the 2 fxs/3fxo card are all green > So i plow'd ahead on possible shakey ground ... > > But now i dont get any dial tone when i pick up a hand set, the adit 600 > recognizes the off hook & goes amber but * does not see it off hook > And it has registered the channels > == Parsing '/etc/asterisk/zapata.conf': Found > -- Registered channel 1, FXO Kewlstart signalling > > just curious what signaling did you need on the ports for * to be a happy > camper > with adit fxs cards > > >>After mucking around with it a bit, I was able to get it to sync with the > >>channel bank as the clock source for the line: > >>jsci-cbank1> show clock > >> Primary Master Transmit Clock Source: Internal > >> Secondary Transmit Clock Source: Slot A DS1 2 > So this means you have the adit suppling timing to asterisk t1 spans > so your zaptel looks like this > span=1,0,0,esf,b8zs > span=2,0,0,esf,b8zs > span=3,0,0,esf,b8zs > span=4,0,0,esf,b8zs > fxoks=1-24
Have you connected all the FXS and FXO ports to the DS0 ports? -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
