I have an E100P, and in the zaptel.conf I have:
span=1,1,0,ccs,hdb4,crc4,yellow fxsks=1-10
the light on the card is green( BTW what do all those states of the card that zttool reports YELLO, RED, BLUE ..., is there a doc for zttool?, or for the card?)
in the asterisks` zapata.conf I have:
[channels] context=default switchtype=euroisdn signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1
immediate=no callerid="line1"< 238-20-31> channel => 1 callerid="line2"< 238-20-31> channel => 2
but Asterisk on startup reports that:
WARNING[13326]: File chan_zap.c, Line 4173 (ss_thread): CallerID returned with rror on channel 'Zap/1-1' WARNING[14351]: File chan_zap.c, Line 4173 (ss_thread): CallerID returned with rror on channel 'Zap/2-1'
and when I call the number that is supposed to terminate there I get busy signal.
also in the zttool I see strange thing, in the bottom portion where there are RxA, RxB .... the 1111111 ( ones) sometimes change into 000000, they go from up to down and if I enable all the channels then firs on the first column then on the second column, in the bottom half of the screen.
while if I plug the same E1 into Cisco AS5300, whit this config( just exepts):
isdn switch-type primary-net5
controller e1 ... clock source line primary pri-group timeslots 1-31 ...
interface Serial0:15 isdn switch-type primary-net5 isdn incoming-voice modem 64
Framing is CRC4, Line Code is HDB3, Clock Source is Line ...
on Cisco the swithtype is primary-net5 ( my guess its euroisdn ? )
anybody could guess what is the problem?
The admin that runs the Cisco says that signalyng should be PRI , and there is an option for pri signaling in zapata.conf, but the zaptel,conf doesnt have it and so I`d get up with a mismatch, and zasterisk would not start.
--
Anton Yurchenko<[EMAIL PROTECTED]> Digital Generation
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
