I have a premisys slimline 24 channel fxs channel bank. I'm attempting to get it configured to work with my asterisk server. I have 2 T100P cards in the asterisk box. One is connected to an incoming pri, the second is connected to the channel bank.
In my /etc/zaptel.conf file I have the line fxoks=25-48 In my zapata.conf file I have the line signaling=fxo_ks When talking to the company I bought the channel bank from, they wish to know what type of signaling the channel bank will get. Apparently their only familiar with connectling the channel bank straight to the T1 line. What type of signalling do I need to advise them that the channel bank is receiving? He advised me that they commonly see loopstart signaling. When I mentioned Koolstart to him, he was unfamiliar with it. I went with fxoks because that is what someone on the list recommended. All suggestions are appreciated. AJ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
