On Fri, 2003-07-11 at 10:14, Don Pobanz wrote: > It is OK to set up your channel bank for FXS loop start and have * set > up as fxo_ks. That is how mine is set up and it works fine!
On some, that is the only option. I think zhone is one of them. > On Friday, July 11, 2003 9:00 AM, [EMAIL PROTECTED] > [SMTP:[EMAIL PROTECTED] wrote: > > I have a premisys slimline 24 channel fxs channel bank. I'm > > attempting to > > get it configured to work with my asterisk server. I have 2 T100P > > cards > > in the asterisk box. One is connected to an incoming pri, the second > > is > > connected to the channel bank. > > > > In my /etc/zaptel.conf file I have the line fxoks=25-48 > > In my zapata.conf file I have the line signaling=fxo_ks > > > > When talking to the company I bought the channel bank from, they wish > > to > > know what type of signaling the channel bank will get. Apparently > > their > > only familiar with connectling the channel bank straight to the T1 > > line. > > What type of signalling do I need to advise them that the channel > bank > > is > > receiving? He advised me that they commonly see loopstart signaling. > > > > When I mentioned Koolstart to him, he was unfamiliar with it. I went > > with > > fxoks because that is what someone on the list recommended. All > > suggestions are appreciated. > > AJ > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
