> On Fri, 1 Aug 2003 15:25:49 -0500 > "McAughan, Matt" <[EMAIL PROTECTED]> wrote: > >> Have you setup the zaptel.conf and zapata.conf configuration files for >> >how >> ever many ports you have on the card and then run the ztcfg -vvvc >> >command? >> > > Since the module aren't loaded, config zaptel.conf, zapata.conf and run > ztcfg will not work, right?
The modules are loading. Its just that the post-install ztcfg is erroring out. > my conf files: > =========== > zaptel.conf > =========== > fxsls=1-4 This is why. FXS cards use FXO signalling & vice versa. change this to fxols=1-4 > loadzone = us > defaultzone=us > > > =========== > zapata.conf > =========== > callwaiting=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > echocancel=yes > echocancelwhenbridged=no > rxgain=0.0 > txgain=0.0 > group=1 > immediate=no > context=pstn > signalling=fxs_ks This also needs to be changed to fxo. You've got a mismatch here as well. zaptel.conf is set to use loop-start signalling & zapata.conf is expecting kewl-start signalling. I'd recommend changing zaptel.conf to fxoks and changing zapata.conf to signalling=fxo_ks _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
