Martin, With KFLAGS+=-DNO_CALIBRATION uncommented, the module loads fine. Without the calibration. But I have no dial-tone on port 4. All the three other ports works fine. Could it be a hardware problem?
Thanks in Advance Eduardo On Fri, 1 Aug 2003 16:11:12 -0500 (CDT) Martin Pycko <[EMAIL PROTECTED]> wrote: > Try to uncomment in zaptel/Makefile > KFLAGS+=-DNO_CALIBRATION > > and "make clean install" > > that should help > > Martin > > On Fri, 1 Aug 2003, Eduardo Goncalves wrote: > > > On Fri, 1 Aug 2003 15:34:23 -0500 (CDT) > > Martin Pycko <[EMAIL PROTECTED]> wrote: > > > > > What does 'dmesg' say ? > > > > > > > > > CSLIP: code copyright 1989 Regents of the University of California > > PPP generic driver version 2.4.1 > > Zapata Telephony Interface Registered on major 196 > > Freshmaker version: 62 > > Freshmaker passed register test > > Module 0: Initialized > > Module 1: Initialized > > Module 2: Initialized > > Timeout waiting for calibration of module 3 > > ProSlic died on Calibration. > > Module 3: Not installed > > Found a Wildcard FXS: Wildcard S400P Prototype (4 modules) > > > > and then the errors that I mentioned. > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users