Hi! I am sorry to send the question again, I would like to check if someone can help me out on this.
I would like to ask if it is possible to run Asterisk behind NAT. I have a linksys router that forwarded the port UDP 5082 to the local IP of my Asterisk box, I got the error 479 when I try to register my Asterisk box with FWD. (see detail below). Have anyone got Asterisk working behind NAT and successfully registers with FWD? Any pointer or information will be appreciated. Thanks! Terence -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Terence Chan Sent: Sunday, August 10, 2003 3:13 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Registering SIP with FWD and ICONNECTHERE Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the external IP I would like to check if there anyway set * to work behind NAT and successfully register with FWD. Thanks a lot! Terence -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Senad Jordanovic Sent: Sunday, August 10, 2003 8:57 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Registering SIP with FWD and ICONNECTHERE Hi, I am trying to register a SIP service(s) with FWD and ICONNECTHERE. Here is my sip.conf: ------------------------------------------------ [general] port =5060 bindaddr =0.0.0.0 context =default calledid=No CallID register => 400703:[EMAIL PROTECTED]/400703 register => USERNAME:[EMAIL PROTECTED]/400703 [fwd] type=friend username=USERNAME secret=PASSWORD host=fwd.pulver.com dtmfmode=inband [iconnect] type=friend username=USERNAME secret=PASSWORD host=sipauth.deltathree.com dtmfmode=inband ---------------------------------------------- Here is error output i get: File chan_sip.c, Line 388 (retrans_pkt): Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 102 (Request) NOTICE[81926]: File chan_sip.c, Line 2476 (sip_reg_timeout): Registration for '[EMAIL PROTECTED]' timed out, trying again WARNING[81926]: File chan_sip.c, Line 388 (retrans_pkt): Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 102 (Request) NOTICE[81926]: File chan_sip.c, Line 2476 (sip_reg_timeout): Registration for '[EMAIL PROTECTED]' timed out, trying again It shows "212.159.81.202" IP, which is one of old IPs i used when astrisk was originally installed. Now the asterisk is behind NAT. Anyone had the same problem? Senad _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
