So you don't receive any answer from the other side ? Is the circuit in alarm ? Can they do remote loopup test ?
It might be that they don't have their D-channel turned on ... Martin On Fri, 12 Sep 2003, Alastair Maw wrote: > > OK, so I've done this: > > *CLI> pri intense debug span 1 > Enabled EXTENSIVE debugging on span 1 > Sending Set Asynchronous Balanced Mode Extended > > > > [00 01 7f ] > > Unnumbered frame: > > SAPI: 00 C/R: 0 EA: 0 > > TEI: 000 EA: 1 > > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME ] > > 0 bytes of data > Sending Set Asynchronous Balanced Mode Extended > > > The above is repeated about once a second. > > Our provider does indeed have a System-X switch. Is this a known problem > then? Is there no way to resolve it? I couldn't find anything on Google > about it... > > I'd put a TE410P card in instead, but the 1u servers we have are all P4s > and don't have 3.3V PCI slots. The official Word from Digium is that > they'll have a 5V version of the TE410P out in about six weeks' time, > but we have some services that need to go live on these new E1 lines in > about three weeks time, plus we need to do some testing, etc. > > Time to buy a Xeon with 3.3V slots, I guess. :( > > -- > Alastair Maw <[EMAIL PROTECTED]> > MX Telecom - Systems Analyst > http://www.mxtelecom.com > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
