On 11:31, Wed 20 Jul 05, David Hajek wrote: > Hi, > > we are trying to install Junghann's quadBRI into Dell PowerEdge 2800 > system without success. > I don't know if the issue can be that Junghann's card fits 32-bit slot > and Dell PE 2800 has > only 3 PCI-X 64-bit slots. Can this be an issue? > > We get "CRC errors for HDLC frame" when the card is initialized. Any > idea what can be wrong? > > 1/ We use latest bristuff packages. > 2/ We use TE mode > 3/ Card is working on older 2.4 system, we use same cables and ISDN > devices. > 4/ On Dell we have a Centos 4.1 with 2.6.12 kernel. > > After loading the driver we got CRC errors like this: > > Jul 19 17:02:30 ustredna kernel: qozap: CRC error for HDLC frame on card > 1 (cardID 0) S/T port 1
Hi, I had the same errors too when I started to test with the 4port card. After changing the 200M UTP cable that was all put in a corner for a 2 meter cable the problems went away. I read on some previous posts from Klaus-Peter that the CRC errors mean bad cables. In my case the way-too-long cable from the NT1 to my * box was the cause. Maybe this can be of any help -- Michiel van Baak http://michiel.vanbaak.info [EMAIL PROTECTED] GnuPG key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x7E0B9A2D "Why is it drug addicts and computer afficionados are both called users?" _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
