Re: [Asterisk-Users] Should this work?

Mon, 25 Jul 2005 18:03:22 -0700

I changed to:
 
exten => _X.,1,Dial(ZAP/1/${EXTEN},60)
exten => _X.,2,Hangup
 
But still didn't work.
 
even though could see channel with zap show channels - saw a channel 1
 
Angus
 
 
 
----- Original Message -----
Sent: Monday, July 25, 2005 8:45 PM
Subject: Re: [Asterisk-Users] Should this work?

Have you defined the context "default" in the extensions.conf for outbound dialing in the globals section?
 
For example, I have my ZAP channels identified as OUTBND1 not ZAP in the global section. This new global identifier is pointed to ZAP/g1
 
[globals]
OUTBND1=Zap/g1
 
 
Instead of ZAP in my dial plan to call out, I use ${OUTBND1}.
 
Yours:
 
; for dialing outbound - over ISDN line - this bit does not work
exten => _9XX.,2,Dial(ZAP/g1/${EXTEN},60)
exten => _9XX.,2,Hangup
 
Mine would look like this
exten => _9XX.,1,Dial(${OUTBND1}/${EXTEN},##)
exten => _9XX.,2,Hangup
 
 
This helps me to keep track of inbound T1s and outbound T1s.
 
Also, you have 2 (2) priorities listed in your example. You can't really do this.
 
JASON WALKER
----- Original Message -----
Sent: Monday, July 25, 2005 8:11 AM
Subject: [Asterisk-Users] Should this work?

Hello
 
I am using a Junghans quadBRI ISDN card and it is loaded and working.  In Asterisk if I connect to ISDN line it is detected and tells me so.
 
In my zapata.conf I have (abbreviated):
 
[channels]
switchtype=euroisdn
signalling = bri_cpe
 
context=default
group=1
channel => 1-2
 
;plus group 2 - 4
 
 
zaptel.conf:
loadzone=uk
defaultzone=uk
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
 
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
 
 
 
Then in extensions.conf I have:
 
[default]
; this below for internal extensions - works OK
exten => _2XX,1,Dial(SIP/${EXTEN},20,Ttm)
 
; for dialing outbound - over ISDN line - this bit does not work
exten => _9XX.,2,Dial(ZAP/g1/${EXTEN},60)
exten => _9XX.,2,Hangup
 
Error I get is:
 
    -- Executing Dial("SIP/200-e433", "ZAP/g1/902088787367|60") in new stack
Jul 25 11:56:33 NOTICE[6723]: app_dial.c:777 dial_exec: Unable to create channel of type 'ZAP'
  == Everyone is busy/congested at this time
    -- Executing Hangup("SIP/200-e433", "") in new stack
  == Spawn extension (default, 902088787367, 2) exited non-zero on 'SIP/200-e433'
 
 
 
I am dialing with sip phones.  They work if dialing extensions internally but not if try to dial outside - eg dial 9 followed by number.
 
What have I not done right?
 
Angus
 

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to