|
Hi all, I’m installing two HFC pci card (both in TE
mode), I don’t have problem when load module, but whrn I give “ztcfg
–vv”, I see 6 the six channels that I configured, then my computer
hang and I have to reboot it. (I’m using a VIA Epia-M 1000 with Via C3
processor) [EMAIL PROTECTED]:~# modprobe zaptel [EMAIL PROTECTED]:~# insmod
/usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o [EMAIL PROTECTED]:~# ztcfg -vv Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399- SPAN 2: CCS/ AMI Build-out: 399- Channel map: Channel 01: Individual Clear channel (Default)
(Slaves: 01) Channel 02: Individual Clear channel (Default)
(Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default)
(Slaves: 04) Channel 05: Individual Clear channel (Default)
(Slaves: 05) Channel 06: D-channel (Default) (Slaves: 06) 6 channels configured. Any ideas ? Thanks all Giordano |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
