When startin * it tells me:
================================
[chan_zap.so] => (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
Sep 3 17:21:59 DEBUG[1076873856]: chan_zap.c:1208 update_conf: Updated
conferencing on 1, with 0 conference users
-- Registered channel 1, PRI Signalling signalling
Sep 3 17:21:59 DEBUG[1076873856]: chan_zap.c:1208 update_conf: Updated
conferencing on 2, with 0 conference users
-- Registered channel 2, PRI Signalling signalling
-- Automatically generated pseudo channel
== Starting D-Channel on span 1
..snip..
and my zapata.conf is:
=======================
[channels]
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
signalling = bri_net
pridialplan = national
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=yes
group = 1
context=incoming
channel => 1-2
This configuration looks strange. You know that the "channel" word sets
those channels to the "latest" settings above, right? The syntax is a bit
weird. That means that your signalling looks odd - first you set it to
bri_cpe_ptmp and then to bri_net, meaning that bri_net overrides the
previous setting. I'm a bit confused about the PRI signalling here, it looks
like you're using a BRI card, so why pridialplan? I haven't played around
with BRI equipment together with Asterisk (yet) so maybe the PRI signalling
should be there..
What is ztcfg -vv giving as output if you run it?
/Werner
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
