I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though.
My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver all calls (from the outside or internal phones) to my asterisk (CVS HEAD) server. The FXO is my default outbound path and I have a VOIP provider as a secondary. After rebooting the SPA-3000, the internal users of calls routed through the FXO interface hear pretty bad echo. This persists for days, maybe more than a week. At some point, the echo goes away. I've noticed that, when the echo is gone, I hear a rapid series of light clicks on the line when placing a call; after dialing and before the remote end starts ringing. When the *is* echo, I'm not hearing the clicks. Seems to me these clicks are part of the echo training. How do I get this to occur immediately after the SPA-3000 restarts? Why do I have to wait so long to get them started? Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC [EMAIL PROTECTED] phone: 404-932-1355 522 Black Canyon Park http://dugas.cc fax: 866-751-6494 Canton, GA 30114 USA -- Onsite at GDOT W.Annex 404-463-2860 x199 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
