I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer.  I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work.  When you press the hold button, it rings endlessly, the transfer button, displays “transferring” but it does nothing.  Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone.

 

 

Thanks,

 

Alberto

 

The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to