Hi,

My TDM is on its own IRQ, and the x306 has only one full-size PCI slot.. so no playing with it,

what results do you get from zttest ? what IRQ is the card on ?

Marco.


Damian Funnell wrote:
Have you checked that the TDM400P isn't sharing an IRQ with anything else? Don't trust /proc/interrupts - run lspci -v to confirm this.

We have * running on an x206 and found that the only way to stop the TDP400P sharing an IRQ with other devices was to juggle cards between slots.

Hope this helps!
Damian.

FFF Managed Technology Ltd
60 Cook St
P.O. 6368 Wellesley St
Auckland
t +64 9 356 2911
f +64 9 358 9070
m +64 21 415 297
w www.fff.co.nz



Marco Supino wrote:

Hi,

I would like to know what type of configuration could get me closer to 100% hits in zttest, when testing a TDM400P with 4 FXO ports,

I am currently running kernel 2.4.31, on a IBM Xseries 306, with 3gh CPU, HT is disabled, PCI latency was changed, i still cant get more then 99.975% in the zttest testings,

Thanks for any info.

Marco.


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to