I'm running Asterisk 1.09, on Centos 3.5 (FINAL) and a TDM11B. I, like many others, am having problems getting Asterisk to hangup an incoming call when the calling party disconnects.
This is a list of what I have tried (with no success). My incoming PSTN comes from a Mitel SX2000 Lite, so I do not think I can get "disconnect supervision". I tried adding hanguponpolarityswitch=yes in zapata.conf, but when Asterisk starts I get "ignoring hanguponpolarityswitch" in the log. I applied "asterisk-stable-polarity-v5.diff", and tried again but I got the same message in the log. I upgraded to CVS, but get the same message in the log. I've tried BUSYDETECT and BUSYCOUNT but the line stays off-hook. I've tried CALLPROGRESS but the line stays off-hook. I've changed the RXGAIN but the line stays off-hook. I've tried adding the NVLineDetect application, but MAKE and MAKE Install fail on frame.o Something I've noticed, Asterisk is set to answer on 2 rings, but if the calling party hangs-up after the 1st ring, Asterisk picks up anyway (after a delay which matches the 2nd ring) and beings processing. I seem to think I saw on the Internet an external box that handles call progress detection and actively drops the line when a condition is met, however I cannot remember where it was, does anyone know what I'm talking about and where I might get one? Something I've not been able to do, is change the signalling method of the TDM. When I try changing it to loopstart, it complains that I'm trying to use loopstart when the card is configured for kewlstart. Can anyone offer a solution for this, it so frustrating! I've been able to get everything else working (so far!), but this is a real problem! TIA Leigh _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
