Voicomm User wrote:
Hello

Hardware: Eicon Diva 4BRI ISDN Card
Software : Asterisk : Asterisk CVS-v1-0-08/13/05-19:51:52
               Chan Capi: chan_capi-0.6

We are using an Eicon 4BRI ISDN Card here in Australia with Asterisk,
connected to 4 OnRamp services with Telstra.

There are 8 available channels, but after upgrading to latest capi
driver we notice that the box is not able to handle more than 2 calls
at the same time. An engaged signal is heard at the other end. After
this happens once, some calls fail even when all channels are free.
I don't see any messages on console for failes calls. Even when I turn
on 'capi debug' and 'set verbose 20'.

The telstra personnel have confirmed busy signal is sent out by the
PABX. But its bizarre not to see any messages. No error messages are
logged as well.

capi info :
Contr1: 2 B channels total, 2 B channels free.
Contr2: 2 B channels total, 2 B channels free.
Contr3: 2 B channels total, 2 B channels free.
Contr4: 2 B channels total, 2 B channels free.

capi.conf

[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8

[isdn]
isdnmode=ptp     ; Is this correct for Point to Point Mode?
msn=<8 digit local number>
group=1
incomingmsn=*
controller=1,2,3,4 ; there are 4 controllers
devices=2           ; should this be 8?
softdtmf=on
relaxdtmf=on
accountcode=
context=main-menu
echocancelold=yes
;echocancel=yes  ; Turning this on gives a error message each time a
call is terminated.
usecallerid=yes
callerid=asreceived
;echosquelch=1
;echotail=64
;callgroup=1
;pickupgroup=1

The syntax has changed a bit. Time was when the "devices=" line basically said "OK, that's this controller done with, let's commit that and start on the next one..." With 0.6 (if I read it correctly) it goes :

[general]
.
.

[some_string]

group=1
isdnmode=did   <-- note this has changed  [DID/MSN]
incomingmsn=*
rxgain=1.0
txgain=0.8
controller=1
softdtmf=0
accountcode=
context=from-pstn
echosquelch=0
echocancel=yes
echotail=64
devices=2

[some_other_string]

group=1
isdnmode=did
incomingmsn=*
rxgain=1.0
txgain=0.8
controller=2
softdtmf=0
accountcode=
context=from-pstn
echosquelch=0
echocancel=yes
echotail=64
devices=2

Hope this helps...

jd


--

John Daragon                                          [EMAIL PROTECTED]
argv[0] limited
Lambs Lawn Cottage,  Staple Fitzpaine,  Taunton,  TA3 5SL,  UK
v +44 (0) 1460 234068   f +44 (0) 1460 234069   m +44 (0) 7836 576127


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to