Hello Paul & all ,
On Wed, 26 Oct 2005, Mr. James W. Laferriere wrote:
> Hello Paul & all , I've tried everything I know to attempt to get the
> wcfxo.ko not to use irq 9 . THe 6 line cord does not appear to effect
> the signaling to the x100p card , I have turned up the debugging &
> have
> that being syslog'd . Have debugging on zaptel as well . Nothing
> seems
> out of the ordinary . But monitoring from 'asterisk -d -vvvvv -nr'
> console does not show anything '.' . Have I forgotten some
> configurations or magical incantation ? Tia , JimL
>
> On Wed, 26 Oct 2005, Paul wrote:
> > First I don't like the 6 line cord. Use an rj11 2 wire cord, but watch the
> > crossover vrs straight on the old red and green.
> >
> > Next the interrupt must be fixed. Do this in the CMOS before you boot. Go
> > to the PCI bus assignments and set the IRQ or go and disable the serial
> > ports thereby allowing irq 3 and 4 to be assigned.
> >
> > :)
> > Paul
Sorry about the top posting ... Also forgot the syslog output .
Tia , JimL
Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent:
<NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: subsystem zaptel: registering
Oct 26 20:11:19 asterisk-test kernel: kobject zaptel: registering. parent:
<NULL>, set: class
Oct 26 20:11:19 asterisk-test kernel: kobject zaptimer: registering. parent:
zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapchannel: registering. parent:
zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zappseudo: registering. parent:
zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: kobject zapctl: registering. parent:
zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: Zapata Telephony Interface Registered on
major 196
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent:
<NULL>, set: module
Oct 26 20:11:19 asterisk-test kernel: kobject wcfxo: registering. parent:
<NULL>, set: drivers
Oct 26 20:11:19 asterisk-test kernel: PCI: Found IRQ 9 for device 0000:01:02.0
Oct 26 20:11:19 asterisk-test kernel: PCI: Sharing IRQ 9 with 0000:00:1f.3
Oct 26 20:11:19 asterisk-test kernel: kobject zap1: registering. parent:
zaptel, set: class_obj
Oct 26 20:11:19 asterisk-test kernel: New regoffset: 7
Oct 26 20:11:20 asterisk-test kernel: wcfxo: DAA mode is 'FCC'
Oct 26 20:11:20 asterisk-test kernel: Found a Wildcard FXO: Wildcard X101P
Oct 26 20:11:20 asterisk-test kernel: Recalculating slaves on WCFXO/0/0
Oct 26 20:11:20 asterisk-test kernel: Done Recalculating slaves on WCFXO/0/0
(last is WCFXO/0/0)
Oct 26 20:11:20 asterisk-test kernel: Configured channel WCFXO/0/0, flags 0201,
sig 2004
Oct 26 20:11:20 asterisk-test kernel: Registered tone zone 0 (United States /
North America)
Oct 26 20:11:20 asterisk-test kernel: BATTERY!
Oct 26 20:11:39 asterisk-test kernel: Out of storage space
Oct 26 20:11:48 asterisk-test kernel: RING!
Oct 26 20:11:50 asterisk-test kernel: NO RING!
Oct 26 20:11:54 asterisk-test kernel: RING!
Oct 26 20:11:56 asterisk-test kernel: NO RING!
Oct 26 20:13:50 asterisk-test kernel: RING!
Oct 26 20:13:52 asterisk-test kernel: NO RING!
Oct 26 20:13:56 asterisk-test kernel: RING!
Oct 26 20:13:57 asterisk-test kernel: NO RING!
--
+------------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 3542 Broken Yoke Dr. | Give me Linux |
| [EMAIL PROTECTED] | Billings , MT. 59105 | only on AXP |
+------------------------------------------------------------------+
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
