--Original Message Text--- From: cp Date: Tue, 22 Nov 2005 10:25:20 -0500 I fed up with X100P clone card and want to spurge for a better solution. I do not need a router or firewall within this device and really just need basic features. I am considering ATA adapters such as the Sipura 3000, Cisco ATA, Grandstream 488 or a Digium Wildcard TDM400P with one FXO. Does anyone have direct experience with both ATAs and the TDM400P with one FXO port they would share? Kind of Pros and Cons on both solutions. You may reply off list. I appreciate any suggestions and assistance.
Thanks, Chip In my personal experience both are not good options. The SPA-3000 had audion issues...sound level too low. Echo issues when gains settings increased. The TDM400 is very sensitive to the motherboard/IRQ management issues. There is however a procedural solution that I arrived at in frustration. Sign up for a DID with an ITSP the call forward your POTS line to that number. Works beautifully. Not hardware required. You can drop the iPBX completely if needed by simply defeating the call forwardign and keeping a single analog phone handy. Michael -- Michael Graves [EMAIL PROTECTED] Sr. Product Specialist www.pixelpower.com Pixel Power Inc. [EMAIL PROTECTED] o713-861-4005 o800-905-6412 c713-201-1262 fwd 54245 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
