1000pps TDMoE plus vlan tagging, plus l2tp over 10mbps microwave? I assume you have not tried this before, correct?
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Sean Cook > Sent: Thursday, January 26, 2006 6:47 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] * point to point t1 solution? > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Ok... lets get into the network setup... what about bridging a vlan > across your wireless network and sticking both asterisk on the same > segment? l2tp... (can a forgo the posting of the google links?) :) > > > > Damon Estep wrote: > > TDMoE would allow a T1 like connection only over the local Ethernet > segment, since it is not an IP technology it can not be router across ip > networks. > > > > This would be useful to connect 2 asterisk boxes on the same Ethernet > segment (or with a crossover cable). > > > > The advantage would be lower latency than SIP or IAX - the disadvantage > being a constant ~1000 packet per second Ethernet flow requires to keep > the channels up. > > > > Won't work... > > > > > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] [mailto:asterisk-users- > >>[EMAIL PROTECTED] On Behalf Of Sean Cook > >>Sent: Thursday, January 26, 2006 6:36 AM > >>To: Asterisk Users Mailing List - Non-Commercial Discussion > >>Subject: Re: [Asterisk-Users] * point to point t1 solution? > >> > > http://www.voip-info.org/wiki-Asterisk+TDMoE > > > > Damon Estep wrote: > > > >>That would not be a nailed up t1 - signaling at both ends would be via > > > > asterisk. > > > >>I was trying to determine if there is a way to configure asterisk to > > > > emulate a ptp t1 passively (no signaling) - essentially providing the > same > > type of end to end circuit you would get if you ordered a point to point > > esf/b8zs t1 from the telco. > > > >>I know how to set up asterisk to talk to the Nortel (where the Nortel > > > > thinks asterisk is a telco trunk) - but that is not my goal here. > > > >>I want to replace a T1 TIE TRUNK between to Nortel's using Digium t1 > > > > interfaces and an IP link between asterisk boxes, but still allow the > > Nortel to pass signaling directly back and forth. > > > >>Still want to take the challenge? > > > > > > > > > >>>-----Original Message----- > >>>From: [EMAIL PROTECTED] [mailto:asterisk-users- > >>>[EMAIL PROTECTED] On Behalf Of Sean Cook > >>>Sent: Thursday, January 26, 2006 6:12 AM > >>>To: Asterisk Users Mailing List - Non-Commercial Discussion > >>>Subject: Re: [Asterisk-Users] * point to point t1 solution? > > > > > >>Damon Estep wrote: > > > > > >>>Jean-Michel, > > > >>>I agree with all of your comments, and would be willing to bet $100 > that > > > >>NO AMOUNT OF GOOGLING will answer this question definitively. > > > >>I would almost be willing to take that bet... find your exact > >>configuration is probably not going to happen... however finding enough > >>information to piece it together is pretty straight forward... > > > >>http://www.tek-tips.com/viewthread.cfm?qid=1082800&page=10 > > > >>This link tells you that someone else has connected asterisk to a T1 > >>interface on a Nortel NorthStar. (first link for asterisk nortel > >>northstar). > > > >>http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation > > > >>Whould give you a start as to how to configure the T1 card (zaptel > >>drivers). > > > >>http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zaptel.conf > > > >>Would give you a start to configure the zaptel.conf > > > > > >>http://www.voip-info.org/wiki-IAX > > > >>Gives you the skinny (no pun intended) on IAX and working with it to set > >>up the trunk... > > > > > >>So it would be logical to assume that if you can connect to the nortel > >>and asterisk can talk to asterisk via (iax or sip or anything else) ... > >>you only need to set up an appropriate dial plan to pass extensions back > >>and forth. > > > >>In /etc/zaptel.conf: > >> span=1,1,0,esf,b8zs > >> bchan=1-23 > >> dchan=24 > > > >>In /etc/asterisk/zapata.conf: > >> switchtype=national > >> context=from-pbx2 > >> signalling=pri_cpe > >> group=0 > >> channel => 1-23 > > > > > >>[from-iax-trunk] > >>; yeah i know this wouldn't be recommended... > >>exten => _X.,1,Dial(ZAP/g0/${EXTEN},20) > > > >>[from-pbx2] > >>; still not recommended... > >>exten => _X.,1,Dial(IAX/pbx2/${EXTEN},20) > > > > > >>This is not "Uncharted Territory" this is thinking about something as a > >>sum of its parts not as if "No one else has a solution just like me" > > > > > > > >>>After reviewing Adrian Carters very informative response regarding > TDMoE > > > >>I am getting closer to what I need to know (now my googles include > >>"asterisk" AND "TDMoE"). > > > > > >>>This is CLEARLY uncharted territory, while I'll bet it has been done > > > >>before, no one took the time to document it. > > > >>No it isn't... I know plenty of people who have connected legacy systems > >>to IP. I am doing it with a Merlin Legend. > > > > > > > >>>My return to the list if I am successful will be to document the config > > > >>on the wiki... fair exchange? > > > > > >>>And, if along the way I find an EXPERT in this area with REAL WORLD > > > >>PRODUCTION EXPERIENCE I will gladly pay the fees, but I am not about to > >>shell out anything to pay some know-it-all to educate themselves and > >>provide me a half baked solution that has never been put to the real > > > > world > > > >>test. > > > >>If you are LOOKING for REAL WORLD, EXACT RepReSenTAtions (sorry > >>couldn't resist) of exactly what you have... you are probably going to > >>be out of luck. But consider this: > > > >>1. There is plenty of ducumentation on connecting Legacy Systems to > >>Asterisk > >>2. There is plenty of documentation on connect two asterisk systems to > >>eachother. > > > > > > > > > > > >>>D > > > > > > > > > > > >>>>Damon Estep a écrit : > > > > > > > >>>>>Jean-Michel, > >>>>> > >>>>>You missed the entire point - the question is IS ASTERISK CAPABLE OF > > > >>>>EMULATING A POINT TO POINT T1 BETWEEN 2 BOXES, AND IF SO ARE THERE ANY > > > >>WEB > > > > > >>>>BASED HINTS I MIGHT LOOK AT? Not WILL YOU DO IT FOR ME? > > > > > >>>>Yes, I think Asterisk can do what you are trying to achieve. No, I > > > > don't > > > >>>>know how to do it, and no I won't do it for you since I've never been > > > > in > > > >>>>the situation you're in. > > > >>>>As for "web based hints", with some experience I've found that google > > > > is > > > >>>>as good as asking the mailing list. If you have no success with the > >>>>mailing list, the wiki (voip-info.org) and google, you can try the irc > >>>>channel #asterisk on freenode. > > > >>>>If that still doesn't work, shelling out a few hundred bucks for a > >>>>consultant to help you do it - and train you in the process - is the > >>>>other alternative, and is often a good deal. > > > >>>>I've done it a couple of times myself, and it's awesome how far people > >>>>can get you and how hard they try when you recognize the value of > their > >>>>work with some money (as opposed to just asking nicely). > > > >>>>Cheers, > >>>>Jean-Michel. > > > >>>>_______________________________________________ > >>>>--Bandwidth and Colocation provided by Easynews.com -- > > > >>>>Asterisk-Users mailing list > >>>>To UNSUBSCRIBE or update options visit: > >>>> http://lists.digium.com/mailman/listinfo/asterisk-users > > > >>>_______________________________________________ > >>>--Bandwidth and Colocation provided by Easynews.com -- > > > >>>Asterisk-Users mailing list > >>>To UNSUBSCRIBE or update options visit: > >>> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > >>_______________________________________________ > >>--Bandwidth and Colocation provided by Easynews.com -- > > > >>Asterisk-Users mailing list > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > - --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > Asterisk-Users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.2 (MingW32) > Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org > > iD8DBQFD2NLZy9wPyZpnL2URAiuwAKCGCs50iCQIBA+i3ziuMQEPDjREtQCfWo0e > DhM8Xff+XPLH7wRzu+RkWFY= > =DAHC > -----END PGP SIGNATURE----- > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
