Damon Estep a écrit :
Lets put the TDMoE aside for a minute...
The same trunking could be achieved with SIP or IAX, could it not (with higher
latency)?
The rest of the question remains - is there a way to get asterisk to output,
bit for bit, on a t1 interface, the same data that is input on a remote
asterisk box t1 interface - using any trunking protocol.
This is what would be required to truly emulate a "signaling un-aware" point to
point t1 like one that you would get from a telco if you ordered a point to point
esf/b8zs t1 from A location to Z location.
Pure circuit emulation - not ISDN/CAS/E&M signaled voice.
You might want to take a look at rad.com array of products. They sell
small boxes which cost around €3k each and which can do exactly what you
are looking after, which they call TDMoIP. Of course, this is getter
further away from Asterisk :(
Cheers,
Jean-Michel.
--
Jean-Michel Hiver - http://ykoz.net/
Découvrez la Réunion des Technologies IP & Telecom
TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
