saw those, according to RAD they occupy 2mbps even when idle. about $750/each for t1
________________________________ From: [EMAIL PROTECTED] on behalf of Jean-Michel Hiver Sent: Thu 1/26/2006 7:18 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] * point to point t1 solution? Damon Estep a écrit : >Lets put the TDMoE aside for a minute... > >The same trunking could be achieved with SIP or IAX, could it not (with higher >latency)? > >The rest of the question remains - is there a way to get asterisk to output, >bit for bit, on a t1 interface, the same data that is input on a remote >asterisk box t1 interface - using any trunking protocol. > >This is what would be required to truly emulate a "signaling un-aware" point >to point t1 like one that you would get from a telco if you ordered a point to >point esf/b8zs t1 from A location to Z location. > >Pure circuit emulation - not ISDN/CAS/E&M signaled voice. > > You might want to take a look at rad.com array of products. They sell small boxes which cost around EUR3k each and which can do exactly what you are looking after, which they call TDMoIP. Of course, this is getter further away from Asterisk :( Cheers, Jean-Michel. -- Jean-Michel Hiver - http://ykoz.net/ Découvrez la Réunion des Technologies IP & Telecom TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
