I am experimenting with an asterisk setup in my office. The last bit I have to test is working with analog lines. I have TE411p digium card, with an ISDN line plugged into the first, a channel bank plugged into the second port, and the last two ports empty. I have the following setup in my zaptel.conf:
span=1,1,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,d4,ami fxsks=25 And in zapata.conf, I have: group=2 language=en context=from-pstn signalling=fxs_ks channel=>25 I have one analog line plugged in for testing. If I dial that analog number, the inbound call arrives, and it works great. However, when I place an outbound call, I get the following output: -- Called g2/5148346 -- Zap/25-1 answered SIP/412-9b72 However, my number never rings. After about 30 seconds, I get a message saying my call could not be completed as dialed. Almost like it didn't get all of the digits. Is there a way to inject a pause before dialing? Any other thoughts? Any help is greatly appreciated. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
