I dunno about your provider but I know that 2 of my 3 MCI PRI circuits
have no 911 abilities. MCI tells me this is becasue I have no local
dialing plan on them.
Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com
Michael Collins wrote:
911 **should** work on a PRI. If you are getting a hangup and you don’t
see a valid hangupcause, it might be best to get your carrier on the
line and have them monitor the circuit while you dial 911. They might
be able to tell you what the problem is.
-MC
------------------------------------------------------------------------
*From:* [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] *On Behalf Of *Joe Pukepail
*Sent:* Tuesday, February 07, 2006 10:10 AM
*To:* Asterisk Users Mailing List - Non-Commercial Discussion
*Subject:* [Asterisk-Users] 911 and ISDN PRI
Does asterisk support this? I have a location that I planned to only
put a PRI line, but testing 911 (I called them first), I just get a
hangup. Does 911 normally work over a PRI line? Anything special I
have to setup in asterisk?
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
