Viktor Tatianin wrote:
Hi Steve
I attempt change in zapata.conf
cas=1-15:1101 but use zttool view ABCD bits 1010
Regards,
Viktor
Have you put the E1 in CAS mode with something like:
span=1,1,0,cas,hdb3
Steve
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Steve Underwood
Sent: Friday, February 10, 2006 3:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Tormenta CAS signaling
Viktor Tatianin wrote:
Hello
Can anyone know how may change(inverting) cas signaling ABCD bits at the
Tormenta 2 (four E1 ports) cards
My cards send idle code ABCD 0101 but my mux which use as channel bank wait
ABCD 1001
The idle code is set in zapata.conf. For example:
cas=1-15:1101
Sets CAS mode for channels 1 to 15, with the idle pattern 1101.
Regards,
Steve
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
