I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal.
1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. I did set the phone.conf mode to be dialtone but nothing works. 2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U. There is no sound card in the machine. I assume its not the problem. The machine is an RH9 with 2.2Ghz and 256RAM. Any ideas or help would be appreciated. -- Costas Menico Meezon Software Corp 201-224-8111 [EMAIL PROTECTED] -- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
