I installed Asterisk as per instructions in the FAQ on the digium.com site. Double checked it. I also think they have a bug in the zapata.conf where the context should be incoming and not internal.I had similar problems with my S100U.. In fact I went through three of them in 6 months... The just kept breaking..
1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event and displays the message on the screen. I tried dialing but nothing happens. I hangup and * shows the hangup event. I did set the phone.conf mode to be dialtone but nothing works.
2) I can dial from the outside and the phone on the S100U rings. Asterisk shows Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while but doesnt work. There is no communication between the outside phone and the one on the S100U.
There is no sound card in the machine. I assume its not the problem.
The machine is an RH9 with 2.2Ghz and 256RAM.
Any ideas or help would be appreciated.
So I would be inclined to suspect a faulty S100U over an incorrect configuration..
Later..
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
