How did you determine that they are faulty? Did Digium replace them? Thanks
---------- Original Message ---------------------------------- From: WipeOut <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Sat, 25 Oct 2003 08:39:31 +0100 >costas wrote: > >>I installed Asterisk as per instructions in the FAQ on the digium.com site. Double >>checked it. I also think they have a bug in the zapata.conf where the context >>should be incoming and not internal. >> >>1) I hear no dialtone when I pickup the phone on the S100U. Asterisk sees the event >>and displays the message on the screen. I tried dialing but nothing happens. I >>hangup and * shows the hangup event. >>I did set the phone.conf mode to be dialtone but nothing works. >> >>2) I can dial from the outside and the phone on the S100U rings. Asterisk shows >>Ringing. However when I pick it up it says "Attempting to Bridge". I wait a while >>but doesnt work. There is no communication between the outside phone and the one on >>the S100U. >> >>There is no sound card in the machine. I assume its not the problem. >> >>The machine is an RH9 with 2.2Ghz and 256RAM. >> >>Any ideas or help would be appreciated. >> >> >> > I had similar problems with my S100U.. In fact I went through three of >them in 6 months... The just kept breaking.. > >So I would be inclined to suspect a faulty S100U over an incorrect >configuration.. > >Later.. > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users > -- Costas Menico Meezon Software Corp 201-224-8111 [EMAIL PROTECTED] -- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
