On Fri, April 21, 2006 11:45, David Waugh said: > Hello Klaus, > > I will answer your questions In turn: > > 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? > Yes they do. > > 2. Can the clock (master/slave) be configured independent from the mode > (TE/NT) > No
Thus, what is the limitation? TE = slave ????? NT = master ????? > 6. Difference between V-4BRI and 4BRI: As far as I understand the 4BRI > is the better (more expensive) card which also offers FAX on/offramp. > Nevertheless I can use V-4BRI for faxing when using spandsp. Both cards > do support onboard echo cancellation. Are this assumptions correct? > > The difference between the Diva Server V-Series and the normal Diva > Server cards is that you can only use the V-Series for Voice > applications. You can not fax with a V-Series card. If you try and fax > with a V-Series card you will get an error. Using spandsp and V-4BRI does not work? What about a pass-through scenario: PSTN <-2xBRI-> Asterisk <-2xBRI-> oldPBX Does Asterisk with the V-4BRI allows to pass through fax calls (or other data calls) from the PSTN to the old PBX? > 2. " ...install the isdn4k-utils-devel package...". What is isdn4k ? > I'm a little bit confused about what I have to install. > > This is just a package that contains the capi.h file that is needed to > compile the chan_capi-cm driver. btw: libcapi20-dev on debian ;-) regards klaus _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
