Some more info to my problem:
ipt-dev01*CLI> zap show status
Description
Alarms IRQ
bpviol CRC4
T2XXP (PCI) Card 0 Span
1
OK
0
0 0
ipt-dev01*CLI> pri show span 1
Primary D-channel: 24
Status: Provisioned, Down,
Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
Any ideas? ZTCFG looks good.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 10:41 AM
To: [email protected]
Subject: [Asterisk-Users] Problems with zaptel and TE210P
Hello,
I'm just starting
out with asterisk and I'm playing around with the system. Currently I have
a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP
soft phone on my laptop for testing that is working fine. When I try to
place a call from my soft phone I get this from Asterisk:
May 1 09:11:41
NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create channel of type
'Zap' (cause 34 - Circuit/channel congestion)
== Everyone
is busy/congested at this time (1:0/1/0)
== Auto
fallthrough, channel 'SIP/test-3a26' status is 'CONGESTION'
#/etc/zaptel.conf:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
#/etc/asterisk/zapata.conf:
[channels]
switchtype=national
context=default
signalling=pri_cpe
group=1
channel =>
1-23
#/etc/asterisk/extensions.conf:
[general]
static=yes
writeprotect=no
autofallthrough=yes
[default]
exten =>
123,1,Answer()
exten =>
123,2,Playback(hello-world)
exten =>
123,3,Hangup()
exten =>
_9NXXXXXX,1,Dial(Zap/g1)
Any ideas?
Thank you in advance, your help is greatly appreciated.
-Dan
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
