RE: [Asterisk-Users] Problems with zaptel and TE210P

Mon, 01 May 2006 12:03:34 -0700

Thank you for the reply Alexandar.
 
After I restarted my dev machine I recieved these messages from asterisk:
 
chan_zap.c:2290 pri_find_dchan: No D-channels available!  Using Primary channel 24 as D-channel anyway!
chan_zap.c:8202 pri_dchannel: PRI got event: No more alarm (5) on Primary D-channel of span 1
May  1 10:23:27 WARNING[3882]: chan_zap.c:2290 pri_find_dchan: No D-channels available!  Using Primary channel 24 as D-channel anyway!
 
So you are right on the D-Chan.  If my telco says everything is ok, what should I look at next?
 
AFAIK this PRI was in working condition before I moved it to the asterisk test machine.
 
Thanks!
 
-Dan

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez
Sent: Monday, May 01, 2006 11:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

Looks like your D-channel is down.

 

Ztcfg reports all is ok, b/c as far as iut is concerned, it is talking to your card just fine. LibPri handles the PRI implemetaton.

 

Since you are able to see the pri commands from the CLI, Isdn supprt is linked into your asterisk core.

 

Call your telco and ask if they have your D-channel in a loop.

 

 

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 2:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

 

Some more info to my problem:

 

ipt-dev01*CLI> zap show status

Description                              Alarms     IRQ        bpviol     CRC4

T2XXP (PCI) Card 0 Span 1                OK         0          0          0

 

ipt-dev01*CLI> pri show span 1

Primary D-channel: 24

Status: Provisioned, Down, Active

Switchtype: National ISDN

Type: CPE

Window Length: 0/7

Sentrej: 0

SolicitFbit: 0

Retrans: 0

Busy: 0

Overlap Dial: 0

T200 Timer: 1000

T203 Timer: 10000

T305 Timer: 30000

T308 Timer: 4000

T313 Timer: 4000

N200 Counter: 3

 

Any ideas? ZTCFG looks good.

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Brummer
Sent: Monday, May 01, 2006 10:41 AM
To: [email protected]
Subject: [Asterisk-Users] Problems with zaptel and TE210P

Hello,

I'm just starting out with asterisk and I'm playing around with the system.  Currently I have a Digium TE210P connected to a PRI on the Asterisk server.  I have a SIP soft phone on my laptop for testing that is working fine.  When I try to place a call from my soft phone I get this from Asterisk:

 

May  1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion)

  == Everyone is busy/congested at this time (1:0/1/0)

  == Auto fallthrough, channel 'SIP/test-3a26' status is 'CONGESTION'

 

 

#/etc/zaptel.conf:

span=1,0,0,esf,b8zs

bchan=1-23

dchan=24

 

#/etc/asterisk/zapata.conf:

[channels]

switchtype=national

context=default

signalling=pri_cpe

group=1

channel => 1-23

 

#/etc/asterisk/extensions.conf:

[general]

static=yes

writeprotect=no

autofallthrough=yes

 

[default]

exten => 123,1,Answer()

exten => 123,2,Playback(hello-world)

exten => 123,3,Hangup()

 

exten => _9NXXXXXX,1,Dial(Zap/g1)

 

 

Any ideas?  Thank you in advance, your help is greatly appreciated.

 

-Dan

 

 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to