Stopping and restarting Asterisk will lose the hints, then
you will have to wait until the phone registers again. With 1.2.7.1 a
reload shouldn't lose anything. Change the register time on the phones to
something less that 60 minutes if it's a big problem. Instead of factory
defaulting the phones you might find a simple restart will re-register the phone
and BLF will work on the phone.
Regards
lee
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem
2006/5/24, asterisk <[EMAIL PROTECTED]>:
Hi,
Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as one
touch dials and call the correct number. The only way I cen get the lights
working again is to reset to factory default and re-build the config.
I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.
Any ideas ?
Fadge
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users