RE: [Asterisk-Users] GXP2k and BLF problem

Lee Archer Wed, 24 May 2006 04:42:17 -0700

I run 1.1.0.13 on my GXP's and after stopping and starting the server I either wait for the phones to re-reg or I reboot the phones. After restarting asterisk does rebooting the phones does fix the problem?

Lee

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of asterisk
Sent: 24 May 2006 12:25
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

Phones are configured for “asterisk BLF” . Like I said, the config works when the phone is defaulted and rebuilt but stops working if the server is rebooted. Show hints Gives:

-= Registered Asterisk Dial Plan Hints =-

310 : SIP/310 State:Unavailable Watchers 0

305 : SIP/305 State:Idle Watchers 0

304 : SIP/304 State:Idle Watchers 0

303 : SIP/303 State:Idle Watchers 0

302 : SIP/302 State:Idle Watchers 0

301 : SIP/301 State:Unavailable Watchers 0

----------------

- 6 hints registered

Thanks

fadge

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
Sent: 24 May 2006 12:01
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

Are the GXP's configured properly for BLF and what does show hints print?

Lee

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

It does not happen with a reload of asterisk but when the server is rebooted. I have set the register timeout to 1 min but this has no effect. The BLF still does not work. The * is V 1.2.7.1. I can see the phone register first time when phone reboots and would expect to see it re-register every 1 min on the console if I understand things correctly, but it does not.

Fadge

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Regards

lee

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem

asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs...

2006/5/24, asterisk <[EMAIL PROTECTED]>:

Hi,

Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as one
touch dials and call the correct number. The only way I cen get the lights
working again is to reset to factory default and re-build the config.

I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.

Any ideas ?

Fadge

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --


Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

RE: [Asterisk-Users] GXP2k and BLF problem

Reply via email to